您好,欢迎来到100招商网! 请登录    [QQ账号登录]  [免费注册]

100招商网,专业化企业招商推广平台
  • 招商
  • 供应
  • 产品
  • 企业
首页 > 上海企业信息网 > 化工 > 塑料油墨 > <上一个   下一个>
丝印pp油墨

丝印pp油墨

价    格

更新时间

赵轩
15900568152 | 021-59507952
  • 联系人| 赵轩
  • 联系电话| 021-59507952
  • 联系手机| 15900568152
  • 主营产品| pp免处理油墨,自干金属油墨,免烘烤金属自干油墨,高温钢化玻璃油墨,uv丝印移印油墨
  • 单位地址| 上海市嘉定区沪宜公路6106号
查看更多信息
本公司最新发布
本页信息为上海凯贤印刷科技有限公司为您提供的“丝印pp油墨”产品信息,如您想了解更多关于“丝印pp油墨”价格、型号、厂家,请联系厂家,或给厂家留言。
上海凯贤印刷科技有限公司为您提供丝印pp油墨。丝印pp油墨
油墨特性:拥有和德国彩丽宝一样的颜色,主要用于pp、pe、bopp等材料上,具有高色泽、高色彩、高遮盖力、高稳定性、耐酒精及耐磨擦之特点。
  印刷:丝印移印均可。
  表干及实干时间:表干时间自然挥发5-10分钟;实干时间在24小时以内。
  稀释及清洗:sv3慢干开油水、uvk1(移印开油水)同时可使用718洗网水清洗。
  
  测试方法(完全干燥后):
  1、3m胶纸粘在画有百格的油墨表面,45度角迅速拉起不脱油;
  2、纯度99%的工业酒精,一千克砝码用棉布包住在油墨表面,以水平力来回拉200次无脱色;
  3、耐磨:橡皮擦500g力水平来回擦500次。
  
  使用方法:
  1、使用前应充分搅拌,用后-封闭;
  2、搅拌时加开油水10-15%,稀释到印刷粘度;
  3、网板塞网时可用洗网水清洗;
  4、不得与其它类型油墨混合使用。
  
  注意事项:
  1、塑胶材料的外观相似,但可能会是不同的材料,客户需试印确定其符合要求后,再批量印刷;
  2、在移印过程中,如出现拉丝或散开,可适当加入一些慢干膏即可;
  3、环境温度过高,将会影响油墨原有;
  4、根据气候变化,请远离火源,阴暗环境下存放。
5、技术参考数见下表:
检验项目 检验结果 测试条件
油墨线度 ≤12um 刮板细度计
干膜光泽 ***65° 60°镜面光泽计
干燥速度 表干 25℃×5-10min 或60℃×2-3min
实干 25℃12hr或60℃×10min
耐酒精性 无变化 500克力/cm2酒精棉200次来回
附着力 100/100 1mm×1mm×100格3m胶纸剥离
耐酸性 无变化 浸泡5%hci×24hr
耐碱性 无变化 浸泡5%naoh×24hr
耐盐性 无变化 浸泡5%naci×24hr
耐水性 无变化 浸泡20℃自来水×96hr
耐磨性 不见底 500克/cm2负载含砂橡皮200来回
耐热性 无变化 80℃×12hr

ink characteristics: have&germany caili treasure the same color, is mainly used for pp, pe, bopp&other materials, with a high color, high color, high covering power, alcohol resistant&wear resistance, high stability.
printing: silk screen printing can be.
table dry&work time: surface dry time natural volatile 5-10 minutes; work time within 24 hours.
dilution&cleaning: sv3 slow dry open water, uvk1(printing open water) also can use 718 washing network water cleaning.
test method (completely dry):
1, 3m adhesive tape sticky ink surface adhesion in painting,45 degree angle quickly pulled off the oil;
2, purity 99% of industrial alcohol, using cotton bag in the surface of the ink one kilogram weight to horizontal force&pull 200 times without decolorization;
3, wear: the eraser 500g force level wipe 500 times back&forth.
method of use:
1, before the use should be fully mixing, use at any time after the closure;
2, mixing an additional 10-15% in oil&water, diluted to printing viscosity;
3, mesh plug mesh can be used when washing network water cleaning;
4, shall not be mixed with other types of ink.
the matters needing attention:
1, the plastic material of similar appearance, but may be of different materials, customers need to try to determine its requirements,&then bulk printing;
2, in the printing process, such as drawing/spread out,may be appropriate to add some slow dry paste can be;
3, the ambient temperature is too high, it will affect the quality of the original ink;
4, according to the climate change, please stay away from fire, stored in dark environment.
  


     本公司主营: pp免处理油墨 - 自干金属油墨 - 免烘烤金属自干油墨 - 高温钢化玻璃油墨 - uv丝印移印油墨
     本文链接:https://www.zhaoshang100.com/gongying/58237438.html
     联系我们时请一定说明是在100招商网上看到的此信息,谢谢!
     联系电话:15900568152,021-59507952,欢迎您的来电咨询!

北京 上海 天津 重庆 河北 山西 内蒙古 辽宁 吉林 黑龙江 江苏 浙江 安徽 福建 江西 山东 河南 湖北 湖南 广东 广西 海南 四川 贵州 云南 西藏 陕西 甘肃 青海 宁夏 新疆